Showing 1-10 of 296 results

Browse for Ornamental Gate Hinges best prices at PriceSero.com

  • 2 Pair Barrel Gate Hinge Heavy Duty 5" with Grease Zerk Fitting and Welding Plate by Bobco Metals

    Our heavy duty barrel hinges come with a ball bearing and 1/8" NPT grease zert. These hinges are heavy duty with thick or thin weld plates for you to choose from. The very smooth operation makes this hinge perfect for any gate applications. length 5-3/4" width 1-9/16" depth 15/16" weld plate 3/16" pin size 5/8" Listing is for 2 pairs of hinge - LOT of 2 Pairs
    Ornamental Gate Hinges

    • ASIN: B01NAWLI5E
    • Brand: L.A. Ornamental
    • UPC: 748613038163

  • Steel 3/4" J Bolt Welded Hinge Heavy Driveway Gates For Welding on Larger Iron or Steel Gates

    Sold in Pairs J-Bolt pivot hinge is a very heavy duty hinge specially made for heavy gates and doors. This hinge will swing a full Circle if installed without a stop. Hinge is made up of Steel on Female side with grease fitting and plate to weld to Steel post, J-bolt is made of Zink Plate 3/4" x 7" Threaded Adjustible rod
    Ornamental Gate Hinges

    • ASIN: B0051RWO1K
    • Brand: L.A. Ornamental
    • UPC: 786956743825

  • 3/4 J-Bolt with Plate J Bolt Hinges For Large Heavy Driveway Gates, Steel, Iron, Wood or Aluminum Mounts on a 4" X 4" Post

    3/4" X 7" Steel Heavy Duty J-Bolt Pivot Hinge Bolt pivot hinge is a very heavy duty hinge specially made for heavy gates and doors. This hinge will swing a full 180 degrees if installed without a stop. Hinge is made up of a mounting plate (flange)which attaches to the wall or post and the J-Bolt arm which attaches to the gate. with 2 pre-drill holes 3/8", the plate is 3/8" X 11/2", can be mounted on a 4" X 4" Post
    Ornamental Gate Hinges

    • ASIN: B0059BCRP6
    • UPC: 786956743641

  • 1 Pair Barrel Gate Hinge 7" Heavy Duty with Grease Zerk fitting and Welding Plate by Bobco Metals

    Barrel Hinges 7" DIAM: 1-1/4" H: 7" PIN: 3/4" PLATE (W): 1-1/2" L: 2-3/4" GAP: 1-3/4". A barrel is a component of a hinge that has a hollow cylinder shaped section where the rotational bearing force is applied to the pivot. It also has a screw shaped section for fastening and/or driving the pivot. A pair of 7" barrel hinges may hold up to 900lbs. Weld on the mounting plate pin sits on ball bearings for easy pivot. Welding required for installation.
    Ornamental Gate Hinges

    • ASIN: B01N25Q7CZ
    • Brand: L.A. Ornamental
    • UPC: 748613038187

  • 5" Steel Heavy duty Barrel Weld Square Driveway Gate Hinge ball bearing (Pair)

    5" Steel Heavy duty Barrel Weld Square Driveway Gate Hinge ball bearing (Pair) Heavy duty hinge with a ball bearing and 1/8" NPT grease zert. Perfect for any gate application. 4-15/16" x 1-7/16" x 1" Pin 5/8" Listing is for pairs of hinge
    Ornamental Gate Hinges

    • ASIN: B06X9HZL73
    • Brand: L.A. Ornamental
    • UPC: 748613038378

  • Guardian Gate Hinge Flat Mount Driveway Heavy Duty - Both Sides Prime Coated

    Designed for maximum durability and have a dependable roller bearing design. They offer even weight distribution, trouble free operation and are fully lubricated. These hinges have the largest weld surface which make it easy to install and mount. Rated to 3000 pounds per pair. This listing is for one pair
    Ornamental Gate Hinges

    • ASIN: B0792GH592
    • Brand: LA Ornamental
    • UPC: 748613041712

  • Hardware Essentials Ornamental Strap Hinge

    Doors and gates wear out hinges and posts over time. Weight, size, and constant use can contribute to hinge wear. With Hardware Essentials Ornamental Gate Strap Hinges are great for replacing hinges or for new installation. Use for left or right hand applications. Each hinge is decor friendly to add that finishing touch. Available in several sizes and finishes.
    Ornamental Gate Hinges

    • ASIN: B00GS8HGPU
    • Brand: Hillman
    • UPC: 038902000972

  • Festnight Ornamental Iron Garden Driveway Entry Gate, 4' x 8" x 4' 5", Black

    Description:   Our gate is fully forged, which is thicker and heavier than most iron gates on the market.  This gate also comes with a bolt hinge for quick lock and mounting posts for easy installation.  This gate is a great combination of strength, corrosion resistance, and affordable price! This garden/driveway gate is fully welded and powder coated for lasting durability. Specification: Material: Wrought iron Powder coated in black Total size: 4' x 8" x 4' 5" (L x W x H)
    Ornamental Gate Hinges

    • ASIN: B078X5KYFB
    • Color: Black
    • Brand: Festnight
    • UPC: 721047859382

  • Stanley Hardware S785-310 CD909 Decorative Heavy T Hinges in Black Coated, 2 pack

    Stanley 785310 - 6" Black Coated(1D) Decorative Lifespan T-HingeStanley is proud of its reputation for excellence. They are dedicated to continually testing, designing and improving their products to ensure quality and maximum function. Maintaining their standing of being the world's best at what they do is important to them and what you expect from a name like Stanley. Stanley 785310 - 6" Black Coated(1D) Decorative Lifespan T-Hinge Features:LifeSpanLimited lifetime guaranteeExclusive bearing design eliminates metal to metal contact to reduce wearScalloped design enhances appearanceFlat Black finish compliments the decorative stylingIncrease...
    Ornamental Gate Hinges

    • ASIN: B00004Z111
    • Color: Black Coated
    • Brand: Stanley Hardware
    • UPC: 033923107549

  • National Hardware N109-037 6 Pack 8in. SPB841 Ornamental/Reversible T Hinge, Black

    National N109-037 Ornamental Reversible 8" T-Hinge - Black (SPB841). Heavy duty for extra strength. For full surface applications. Designed for gates, garage doors, barns and sheds. Bearing design eliminates metal to metal contact for smooth, quiet operation. Decorative design. Tight pin allows for right or left hand applications. Lags matching finish are included for mounting. Manufactured from hot-rolled steel.
    Ornamental Gate Hinges

    • ASIN: B077QF433F
    • Brand: National Hardware
    • UPC: 886780017878

  • Ornamental Gate Hinge, Black, 4-In.

    .onlineRetailerItemDescription {display: none;}V286, 4", Black Extra Heavy T-Hinge, Offset Screw Holes For Extra Strength & To Prevent Wood From Splitting, Tight Pin For Left Or Right Hand Applications, Heavy Duty, Manufactured With Hot Rolled Steel, Visual Pac.4", Black Extra Heavy T-Hinge, Offset Screw Holes For Extra Strength & To Prevent Wood From Splitting, Tight Pin For Left Or Right Hand Applications, Heavy Duty, Manufactured With Hot Rolled
    Ornamental Gate Hinges
    National Hardware V286 Extra Heavy T-Hinge with offset screw holes for extra strength and to prevent wood from splitting. Designed for applications with narrow mounting surfaces, such as barn and shed doors, storage bins, tool boxes and gates.4Finish: BlackMaterial: SteelHeavy-dutyOffset screw holes for extra strength and to prevent wood from splittingTight pin for left or right hand applicationsManufactured with hot-rolled steelVisual

    • UPC: 131473694
    • Model: N129-007
    • Color: Multicolor
    • Size: 44 Inch

  • WALL MOUNT FLAT BACK Chain Link Fence Gate Hinge - 5/8 Hinge Pin 1 PACK

    WALL MOUNT FLAT BACK Chain Link Fence Gate Hinge - 5/8 Hinge Pin. Handy to mount your hinge to a barn, shed, flat wood fence, or any other upright flat surface. Use in conjunction with a Frame Hinge (the Frame Hinge connects to the chain link gate frame and has a 5/8" hole to match the 5/8" pin on this Flat Back Wall Mount Chain Link Gate Hinge). Takes 2 of these wall mount plate hinges for most gates. Screw or bolt to flat surface. 1
    Ornamental Gate Hinges
    Flat Back Wall Mount hinge is for starting or ending your fence against a flat vertical surface.Great for mounting up against a shop, barn, flat wood fence, shed, square wood post, etc.The 5/8" male pin will let you use in conjunction with a 5/8" female Frame Hinge. (not included)Galvanized. Takes 2 of these wall mount plate hinges for most gates. Screw or bolt to flat surface.This WALL MOUNT FLAT BACK Chain Link Fence Gate Hinge - (5/8 Hinge Pin) listing is a 1 PACKWALL MOUNT FLAT BACK Chain Link Fence Gate Hinge - 5/8 Hinge Pin. Handy to mount your

    • UPC: 863091609
    • Rating: 5.0

  • ALEKO 1/2 Small Hinge J-Bolt for Driveway Gates Iron Gate

    The Aleko J-Bolt pivot hinge is a very heavy duty hinge specially made for heavy gates and doors. Hinge is made up of steel on the female side with grease fitting and plate to weld to steel post. Comes with two 5" bolts, two nuts and two
    Ornamental Gate Hinges
    Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricatedBall bearingAdjustable J-bolt pivot hingeHinge has a welded plate with 2 holes to attach with screws or bolt to an existing structure2 bolts, 2 nuts and 2 washers includedPowder

    • UPC: 46097933
    • Model: LM113
    • Size: S
    • Rating: 2.0

  • Shed / Gate Strap Hinge 12" set of 6 Shed Doors, Playhouse, Barns

    Set of 6 T Hinges Heavy Duty 12" , Strap Gate Style Hinge for use on shed doors, chicken coops, Gates and other outdoor building. This Hinges swings either right or leftThe hinges are black powdercoated and the pins are non removable. Comes with screws that will use a #2 square drive (not
    Ornamental Gate Hinges
    12" Gate / Shed Door Strap Hinge set of 6 hinges with screws. These hinges can be used on shed doors, gates, and other outdoor buildings. Hinges are black powder coated and the pins are non

    • UPC: 662165298
    • Rating: 4.8

  • Uxcell 15/30pcs 2" Long Stainless Steel Wooden Boxes Crates Door Gate Hinges

    hinge is normally used for cabinet doors. They are very strong but cannot be adjusted once they are fitted.Stainless steel mateiral use for home door or window.Install by screw, here is not included.For CALIFORNIA residents only: WARNING: This product contains chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm.Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains' products, the exposure to these chemicals may be
    Ornamental Gate Hinges
    Color: Silver ToneOpen Size: 46x 32 x 4mm/ 2" x 1.3" x 0.16"(L*W*H)Close Size: 46x 18mm/2" x 0.71"(L*W)Install Hole Size: 4mm/ 0.16"Weight: 150gPackage Content: 15 x

    • UPC: 46550696
    • Color: SilverSilver Tone
    • Size: 4646mm x 32mm x 4mm,15 pcs
    • Rating: 2.5

  • Shut It™ BadAss Hinges product features video

    Ornamental Gate Hinges
    Shut It™ BadAss gate hardware from D&D Technologies offer innovative, high quality gate hinges for the fence, ornamental iron and access control industries. All Shut It hinges are manufactured with...
    D&D Technologies,Shut It,BadAss,gate hardware,sealed bearings,heavy duty,100 year,gate hinge,stee...

    How to install TruClose® Regular Safety Gate Hinges

    Ornamental Gate Hinges

    TruClose Regular Deco Mold - Ornamental Gate Hinges

    Ornamental Gate Hinges
    Tru-Close Regular Deco Mold - Ornamental Gate Hinges
    tca4,TruClose,Reg,DecoMould