Showing 1-10 of 799 results

Browse for Ticn Monolayer Finish best prices at PriceSero.com

  • YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

    The YG-1 E5977TC TiCN-coated carbide extended-reach square nose end mill has a 37-degree helix angle, three flutes, and low surface roughness on the cutting edge for high-performance machining on aluminum and other nonferrous materials. The extended-reach neck style provides greater access to recessed areas of the workpiece than tools with a standard neck style. The 37-degree helix angle provides more support behind the cutting edge than higher angles, and increases cutting action and chip evacuation compared to the standard 30-degree helix. The end mill’s three flutes provide better chip-carrying capacity than four flutes and a finer fini...
    Ticn Monolayer Finish

    • ASIN: B0080CKLAY
    • Brand: YG-1

  • YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, TiCN Monolayer Finish, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter

    The YG-1 E5978TC TiCN-coated carbide long-reach ball nose end mill has a 37-degree helix angle and two flutes for high-performance machining and step milling on aluminum and other nonferrous materials. The long-reach shank provides greater access to recessed areas of the workpiece than tools with a standard shank length. (Feed should be reduced.) The 37-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support ...
    Ticn Monolayer Finish

    • ASIN: B0080HAW9E
    • Brand: YG-1

  • Melin Tool CC-L Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 4 Flutes, 3.2500" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
    Ticn Monolayer Finish

    • ASIN: B0083KGAHQ
    • Brand: Melin Tool
    • UPC: 733438415961

  • Melin Tool CC-M-M-B Cobalt Steel Ball Nose End Mill, Metric, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 4 Flutes, 104mm Overall Length, 20mm Cutting Diameter, 20mm Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
    Ticn Monolayer Finish

    • ASIN: B0083LDL6I
    • Brand: Melin Tool
    • UPC: 733438479826

  • Melin Tool CRP-E Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 5 Flutes, 8.5000" Overall Length, 1" Cutting Diameter, 1" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Round shanks allow use with a wide variety of toolholding systems. Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. A rough finish is produced which will require a finishing pass. Used in difficult and abrasive materials and tough alloy materials, such as stainless steel, nickel...
    Ticn Monolayer Finish

    • ASIN: B0083LLNA4
    • Brand: Melin Tool
    • UPC: 733438426349

  • Melin Tool CCRFP-L Cobalt Steel Square Nose End Mill, TiCN Monolayer Finish, 30 Deg Helix, 6 Flutes, 6.5000" Overall Length, 1.2500" Cutting Diameter, 1.25" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Can remove material at high roughing speeds while producing finishes close to conventional end mills, due to the chip-breaker form. The 8 percent cobalt gives high edge hardness at high temperature levels. Used in difficult and abrasive materi...
    Ticn Monolayer Finish

    • ASIN: B0083LEYQY
    • Brand: Melin Tool
    • UPC: 733438423317

  • YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter

    The YG-1 E5982TC TiCN-coated carbide long-length square nose end mill has a 45-degree helix angle, three flutes, and a center-cutting design for high-performance machining on aluminum and other nonferrous materials. Long-length end mills have longer cutting edges than standard-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The 45-degree helix angle offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. The end mill’s three flutes provide better chip-carrying capacity than four flutes an...
    Ticn Monolayer Finish

    • ASIN: B0080BKK7Y
    • Brand: YG-1

  • Melin Tool CC-A Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 6 Flutes, 4.5000" Overall Length, 1" Cutting Diameter, 1" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
    Ticn Monolayer Finish

    • ASIN: B0083KAUH2
    • Brand: Melin Tool
    • UPC: 733438450986

  • Melin Tool C Cobalt Steel Square Nose End Mill, TiCN Monolayer Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Round shanks allow use with a wide variety of toolholding systems. Used for general purpose millng in most materials of medium hardness such as steel, brass, iron, etc. 30 Degree helix angle.
    Ticn Monolayer Finish

    • ASIN: B0083K4RYE
    • Brand: Melin Tool
    • UPC: 733438411543

  • Melin Tool CC-B Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 4 Flutes, 2.5625" Overall Length, 0.2500" Cutting Diameter, 0.3750" Shank Diameter

    Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
    Ticn Monolayer Finish

    • ASIN: B0083KBJWC
    • Brand: Melin Tool
    • UPC: 733438415046

  • 10-32 UNF YG1 Spriral Flute HSS-Ex Combo Tap 3 FL H3 TiCN Coated Bright Finish

    10-32 UNF YG1 Spiral Flute HSS-Ex Combo Tap 3 FL H3 TiCN Coated Bright Finish
    Ticn Monolayer Finish
    Our part # YG1-T2343C High vanadium HSS spiral flute combo tap, TiCN coated, round shank with square end Specifications: size: 10-32 UNF, H limit: H3, overall length: 2.38", thread length: .276", shank diameter: .194", square size: .152", square length: .250", no. of flutes: 3 Reduces tap breakage, ensures accurate thread depthEliminates loose threads due to tap overfeedingImproves thread quality and chip evacuationAllows tapping of many metals including statinless steels and steelsEliminates "bird nests" around shank of tapTiCN coated for improved performance and tool life in harder materials or high temperature applications100% Satisfaction

    • UPC: 877943765
    • Color: Other

  • M8 x 1.25 YG1 Spriral Flute HSS-Ex Combo Tap 3 FL D5 TiCN Coated Bright Finish

    M8 x 1.25 YG1 Spiral Flute HSS-Ex Combo Tap 3 FL D5 TiCN Coated Bright Finish
    Ticn Monolayer Finish
    Our part # YG1-T5365C High vanadium HSS spiral flute combo tap, TiCN coated, round shank with square end Specifications: size: M8x1.25, D limit: D5, overall length: 2.72", thread length: .472", shank diameter: .318", square size: .238", square length: .375", no. of flutes: 3 Reduces tap breakage, ensures accurate thread depthEliminates loose threads due to tap overfeedingImproves thread quality and chip evacuationAllows tapping of many metals including statinless steels and steelsEliminates "bird nests" around shank of tapTiCN coated for improved performance and tool life in harder materials or high temperature applications100% Satisfaction

    • UPC: 636807948
    • Color: Other

  • 5/16-18 UNC YG1 Spriral Flute HSS-Ex Combo Tap 3 FL H3 TiCN Coated Bright Finish

    5/16-18 UNC YG1 Spiral Flute HSS-Ex Combo Tap 3 FL H3 TiCN Coated Bright Finish
    Ticn Monolayer Finish
    Our part # YG1-T2443C High vanadium HSS spiral flute combo tap, TiCN coated, round shank with square end Specifications: size: 5/16-18 UNC, H limit: H3, overall length: 2.72", thread length: .472", shank diameter: .318", square size: .238", square length: .375", no. of flutes: 3 Reduces tap breakage, ensures accurate thread depthEliminates loose threads due to tap overfeedingImproves thread quality and chip evacuationAllows tapping of many metals including statinless steels and steelsEliminates "bird nests" around shank of tapTiCN coated for improved performance and tool life in harder materials or high temperature applications 100% Satisfaction

    • UPC: 600170446
    • Color: Other

  • M3 x 0.8 YG1 Spriral Flute HSS-Ex Combo Tap 3 FL D4 TiCN Coated Bright Finish

    M3 x 0.8 YG1 Spiral Flute HSS-Ex Combo Tap 3 FL D4 TiCN Coated Bright Finish
    Ticn Monolayer Finish
    Our part # YG1-T5284C High vanadium HSS spiral flute combo tap, TiCN coated, round shank with square end Specifications: size: M5x0.8, D limit: D4, overall length: 2.38", thread length: .354", shank diameter: .194", square size: .152", square length: .25", no. of flutes: 3 Reduces tap breakage, ensures accurate thread depthEliminates loose threads due to tap overfeedingImproves thread quality and chip evacuationAllows tapping of many metals including statinless steels and steelsEliminates "bird nests" around shank of tapTiCN coated for improved performance and tool life in harder materials or high temperature applications100% Satisfaction

    • UPC: 651340360
    • Color: Other

  • M3 x 0.5 YG1 Spriral Flute HSS-Ex Combo Tap 3 FL D3 TiCN Coated Bright Finish

    M3 x 0.5 YG1 Spiral Flute HSS-Ex Combo Tap 3 FL D3 TiCN Coated Bright Finish
    Ticn Monolayer Finish
    Our part # YG1-T5203C High vanadium HSS spiral flute combo tap, TiCN coated, round shank with square end Specifications: size: M3x0.5, D limit: D3, overall length: 1.94", thread length: .197", shank diameter: .141", square size: .11", square length: .188", no. of flutes: 3 Reduces tap breakage, ensures accurate thread depthEliminates loose threads due to tap overfeedingImproves thread quality and chip evacuationAllows tapping of many metals including statinless steels and steelsEliminates "bird nests" around shank of tapTiCN coated for improved performance and tool life in harder materials or high temperature applications100% Satisfaction

    • UPC: 960900917
    • Color: Other

  • Melin Tool A E Cobalt Steel Square Nose End Mill Weldon Shank TiCN Monolaye

    Ticn Monolayer Finish
    Low cost 2aOFBgH Melin Tool A-E Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4.2500" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Di...

    Mod-01 Lec-34 Physical Characterization

    Ticn Monolayer Finish
    Technology of Surface Coating by Prof. A.K. Chattopadhyay,Department of Mechanical Engineering,IIT Kharagpur.For more details on NPTEL visit http://nptel.ac.in
    Physical Characterization

    Mod-01 Lec-40 Performance Evaluation of HFCVD Diamond Coated Tool

    Ticn Monolayer Finish
    Technology of Surface Coating by Prof. A.K. Chattopadhyay,Department of Mechanical Engineering,IIT Kharagpur.For more details on NPTEL visit http://nptel.ac.in
    Performance Evaluation of HFCVD Diamond Coated Tool