Showing 1-10 of 292 results

Browse for Victor Jr Intake best prices at PriceSero.com

  • Edelbrock 2975 INTAKE MANIFOLD

    The Edelbrock Victor Jr. Intake Manifold is a versatile manifold that is excellent for many applications from high performance street to drag strip or circle track racing. It's power ranges from 3, 500 rpm to 8, 000 rpm, and they provide maximum performance for engines with standard port locations with iron or aluminum cylinder heads. The height of this manifold is 4. 58" tall with port dimensions of 1. 90" tall by 1. 10" wide. It does not have any EGR provisions, and is street legal for pre-emissions equipped engines and vehicles. It has been cast so that there is excess mass in appropriate places for port matching and customizing.
    Victor Jr Intake

    • ASIN: B00062YUUI
    • Brand: Edelbrock
    • UPC: 085347029754

  • Edelbrock 29087 INTAKE MANIFOLD

    This high-rise single plane intake is capable of supporting up to 600 hp. The Victor Jr. LS1 accepts a square bore carburetor and includes an electronic timing module that picks up MAP, crank position, and cam position in order to drive the stock LS1 Coil-on-Plug ignition system. The module offers a choice of 6 built-in timing curves, each tailored for engine displacement, cam profiles, and fuel grades. The #29087 (manifold only) can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions....
    Victor Jr Intake

    • ASIN: B000VDJPMK
    • Brand: Edelbrock
    • UPC: 085347290871

  • Edelbrock 2981 INTAKE MANIFOLD

    The Edelbrock Victor Junior Intake Manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. These versatile manifolds are excellent for many applications from high-performance street to drag and circle track racing. It is ideal for oval track and drag racing engines operating between 3, 500 and 7, 500 RPM. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake por...
    Victor Jr Intake

    • ASIN: B00062YAS0
    • Brand: Edelbrock
    • UPC: 085347029815

  • Edelbrock 28455 INTAKE MANIFOLD

    Designed for Gen IV LS engines equipped with LS3, L92 and L76 cylinder heads, this manifold is for EFI or carbureted racing applications operating between 3500-7500 rpm. This manifold uses a standard square-bore carb flange that is compatible with both Edelbrock EFI intake elbows and single bore 90mm throttle body or four-barrel #4150 throttle bodies. EFI manifold #28455 has additional bosses and machining that allow for the use of fuel injectors when combined with the #3638 fuel rail kit (sold separately. The LS3, L92 and L76 all use the same cylinder head. L92 heads are only compatible with a 4. 00" and larger bore diameters; smaller bores ...
    Victor Jr Intake

    • ASIN: B003D2BY66
    • Brand: Edelbrock
    • UPC: 085347284559

  • TurboTorch 0386-0106 A-32 Air Acetylene Swirl Tip

    Victor TurboTorch 0386-0106 A-32 Air Acetylene Swirl Tip can be used with any Air Acetylene torch handle (PLF-A5 or G-4). The orifice screw is removable. The "O" ring is color coded red for acetylene. The industrial applications this swirl tip can handle are HVAC and high capacity applications. Tip size is 3/4" (19.0 mm). The gas flow 33.2 at 14 PSI SCFH and 2.82 at (0.9) M3/HR. The soft solder is 4 to 6 inches (100-150 mm) and the silver braze is 1-1/2 to 4 inches (40-100 mm).
    Victor Jr Intake

    • ASIN: B000NO6VYM
    • Color: Brass
    • Brand: ESAB
    • UPC: 716352010757

  • Victor Technologies 0384-0945 Victor G150-J-P Tote Without Tanks

    Victor tote kit without tanks design features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel. Victor commitment to quality and safety are built into their outfits.
    Victor Jr Intake

    • ASIN: B01GDRF9YA
    • Color: Black
    • Brand: ESAB
    • UPC: 716352593687

  • Victor Technologies 0384-0948 Victor G150-J-Cpt Tote with Tanks

    Victor tote kit with tanks is a new tote design that features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel. Victor commitment to quality and safety are built into their outfits.
    Victor Jr Intake

    • ASIN: B01G7AVRB2
    • Brand: ESAB
    • UPC: 716352595407

  • Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator

    This heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction; G350 Series regulators; WH411C torch handle with built-in check valves; CA411-1 cutting attachment; welding nozzle; cutting tip; RM-grade hose 25' x 1/4"; striker and soft-sided goggles.
    Victor Jr Intake

    • ASIN: B00BYH4KHC
    • Brand: ESAB
    • UPC: 716352567923

  • Airaid AIR-200-996 M.I.T. Modular Intake Tube

    AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene they are built each for a specific vehicle make and model and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intak...
    Victor Jr Intake

    • ASIN: B001S21LJ8
    • Brand: Airaid
    • UPC: 642046209964

  • Edelbrock 28457 Intake Manifold

    Designed for Gen IV LS engines equipped with LS3, L92 and L76 cylinder heads, this manifold is for EFI or carbureted racing applications operating between 3500-7500 rpm. This manifold uses a standard square-bore carb flange that is compatible with both Edelbrock EFI intake elbows and single bore 90mm throttle body or four-barrel #4150 throttle bodies. EFI manifold #28455 has additional bosses and machining that allow for the use of fuel injectors when combined with the #3638 fuel rail kit (sold separately. The LS3, L92 and L76 all use the same cylinder head. L92 heads are only compatible with a 4. 00" and larger bore diameters; smaller bores ...
    Victor Jr Intake

    • ASIN: B003D2HPBO
    • Brand: Edelbrock
    • UPC: 085347284573

  • Edelbrock 2902 Victor Jr. 454-R Intake Manifold

    Edelbrock Victor Jr. 454-R Intake Manifold; Cast; Non-EGR; 3500-7500rpm; Rectangular Port; Chevy Big Block 396-502 cid; For 4 bbl Carbs; Racing Use
    Victor Jr Intake
    Designed for competition 396-502 big-block Chevys. Number 2902 fits rectangular-port heads and number 2904 fits large oval-port heads (1975 & earlier). These intakes are designed to optimize the flow characteristics of an 850 cfm standard flange carb.General InformationManufacturer: EdelbrockManufacturer Part Number: EdelbrockUPC: 085347029020CharacteristicsUsage: RacingEngine Make/Size: Chevy Big Block (396-502)RPM Range: 3500-7500Number Of Carbs: OneCylinder Head Type: StandardEmission: Without EGRPosition:

    • UPC: 50027016
    • Model: 2902
    • Color: Multicolor

  • Edelbrock 2981 Victor Jr. Series Intake Manifold

    Intake ManifoldVictor Jr. Series Intake ManifoldVictor Jr. Series Intake Manifold; 3500-7500rpm; Non-EGR; Designed For Competition 351 Windows V8s 1969-Later; 9.5 in. Deck;SPECIFICATIONS:Cylinder Head Type: StandardEmission: Without EGREngine Make/Size: Ford 5.8L/351WNumber Of Carbs: OnePosition: N/ARPM Range: 3500-7500Usage: RacingWARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.FEATURES:Race-Winning Design For All Types Of CompetitionSingle-Plane Maximizes Torque And HorsepowerRunners Feature Extra Material for Custom PortingFor Performance in 3500 to 7500 RPM RangeFor Standard
    Victor Jr Intake
    Edelbrock2981NEW

    • UPC: 50026316
    • Model: 2981
    • Color: Multicolor

  • Edelbrock 29085 Victor Jr. Series Intake Manifold

    Intake ManifoldVictor Jr. Series Intake ManifoldVictor Jr. Series Intake Manifold; 3500-7500rpm; EFI; Designed For Chevy Competition LS1/LS2 V8 Applications;SPECIFICATIONS:Cylinder Head Type: StandardEmission: Without EGREngine Make/Size: Chevy Small Block LS1Number Of Carbs: OnePosition: N/ARPM Range: 3500-7500Usage: RacingWARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.FEATURES:EFI Manifold OnlyThrottle Brkt Included for 700R-4/200R-4/Turbo 350Use OEM Factory O-Rings for Intake GasketThis high-rise single plane intake is capable of supporting up to 600 hp.
    Victor Jr Intake
    Edelbrock29085NEW

    • UPC: 50026176
    • Model: 29085
    • Color: Multicolor

  • 2904 Victor Junior Aluminum Intake Manifold - Oval

    The Victor Junior 454-O Intake Manifolds are designed to optimize the flow characteristics of an 850 CFM (Cubic Feet per Minute) standard flange carburetors. This manifold features extended- SKU:
    Victor Jr Intake
    The Victor Junior 454-O Intake Manifolds are designed to optimize the flow characteristics of an 850 CFM (Cubic Feet per Minute) standard flange carburetors. This manifold features extended runner dividers, smaller plenum chambers and unique runner design for better 60 feet times and maximum power from 3,500 to 7,500 RPM. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port.FeaturesIntake is made

    • UPC: 199346338
    • Model: ST785548
    • Color: Multicolor

  • EDELBROCK 2981 Victor Junior Intake Manifold 351W

    The Victor Junior Intake Manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. These versatile manifolds are excellent for many applications from high-performance street to drag and circle track racing. It is ideal for oval track and drag racing engines operating between 3,500 and 7,500 RPM. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port.
    Victor Jr Intake
    The Victor Junior Intake Manifold provides maximum performance for engines with standard port location, iron and aluminum cylinder heads. These versatile manifolds are excellent for many applications from high-performance street to drag and circle track racing. It is ideal for oval track and drag racing engines operating between 3,500 and 7,500 RPM. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port.

    • UPC: 641558261
    • Model: E11-2981
    • Color: Multicolor

  • Single Plane Intake Manifold Edelbrock Racing Victor Series Super Torquer II Big Overview

    Victor Jr Intake
    Single Plane Intake Manifold Edelbrock Racing Victor Series Super Torquer II Big Overview http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?No=0&Ns=P_SalesVolume%7c1&Ntk=brand&I=p&lang...
    JEGS,single,plane,intake,manifold,engine,edelbrock,racing,victor,series,super,torquer,II,two,big,...

    Edelbrock Intake Manifold Dyno Test :: Single Vs Dual + Air-Gap Vs Regular

    Victor Jr Intake
    Edelbrock single plane (Victor Jr) vs dual plane (Air-Gap) intake manifolds on the same engine in a dyno test at Westech Performance. Plus a test of the Air-Gap vs Regular dual plane intake manifo...
    Edelbrock,Performer,RPM,Air-Gap,Air,Gap,dual,plane,intake,manifold,single,Victor,Jr,Jr.,dyno,test...

    Speedway Tech Talk - Tips for Selecting an Intake Manifold

    Victor Jr Intake
    Speedway 1957-86 Small Block Chevy Hi-Rise Intake Manifolds (91011465) http://bit.ly/29FtSiz World Products 061040 S/B Chevy Motown Single Plane Intake Manifold (82461040) http://bit.ly/29Lpnma